< Back
You are here  >   Products  >  Septic Tanks
Minimize

Ribbed Septic Tanks

 

 
Underground Tanks 

For many years, rotational molding has proven to be the ideal method of producing a seamless one-piece tank that minimizes the risk of leaking.
In addition, polyethylene, because of its excellent corrosion resistance and chemical compatibility is the ideal material for on-site applications.
And when properly molded, polyethylene can readily endure the stresses imposed by installation and burial loads.                        

At Snyder, we were not content to just develop a line of polyethylene tanks for the on-site/water markets.
We developed designs to further enhance the leak proof properties of the tank(s) and improve the structure to minimize deformation of the tank(s)
and maximize tank life. The result is the best performing tanks available in the marketplace. That is why Snyder is the growing choice for on-site,
water and rainwater harvesting applications.
 


RIBBED TANKS


Single Compartment

Part No.  Gallon FOB Length Width Height #/Manholes
Small Septic Tanks            
5260000W94202 300 Sphere  A  48 1/2"  48 1/2"  49 1/2"  1-20"
5170000W94203 500 Sphere   A  60"  60"  59 1/2"   1-20"
1000900W95301 500 Low Profile   A  88"  48"  42"  1-20"
Single Compartment             
5060000W95307 1050   M,P  100"  64"  62"  2-20"
5060000W95312
 1050 IAPMO
 C
100" 64"
 62"
2-20"
5120000W95307  1500   M,P  140"  64"  62"  2-20"
 5120000W95312 1500 IAPMO
 C  140"  64"  62" 2-20"

Double Compartment
Part No. Gallons FOB Length Width Height #/Manholes
5060000W95302  1050  M,P 100"  64"  62"  2-20"
 506000W95312  1050 IAPMO
C 100" 64" 62" 2-20"
5120000W95302   1500  M,P 140"   64"  62"  2-20"
5120000W95312
 1500 IAPMO
C 140" 64" 62" 2-20"

 
Septic tanks  are pre-plumbed  with inlet and outlet tees, gaskets, and manhole covers.   Low Profile (with the exception of the 500 Low Profile) and Sphere tanks may be used in pumping, dosing and holding applications. 

The 500 Low Profile, the 1050,  and 1500 RIBBED SEPTIC TANKS ARE NOT TO BE USED AS PUMP, DOSING OR HOLDING TANKS.

© 2017 Snyder Industries. Web Hosting SR Web Creators Terms Of Use Privacy Policy